Sliick Ready-to-use- Wax Strips

INGREDIENTS: Glyceryl Hydrogenated Rosinate, Glyceryl Rosinate, Lanolin, Mineral Oil (Paraffinum Liquidum, Huile minérale), Simmondsia Chinensis (Jojoba) Seed Oil, Tocopherol, Fragrance (Parfum), Green 6 (CI61565), Yellow 11(CI47000). POST WAX WIPE INGREDIENTS: Mineral Oil (Paraffinum Liquidum, Huile Minerale), Mentha Arvensis Leaf Oil, Isopropyl Palmitate, Methylparaben.

WARNING: Read directions carefully. Failure to follow instructions, warnings and cautions may result in serious injury. Keep instructions, warnings and cautions for future reference.

PREPARATIONS: 1. Your hair should be 1/4” long or longer for SliickTM Ready-to-Use Wax Strips to grip it successfully. 2. Clean area by applying soap and water, then rinse and pat dry. Powder lightly if skin is oily. Brush off excess powder. HOW TO USE: smooth on – pull off! 1. If wax strip is somewhat hard due to the cold, heat the strip for a few moments with the palms of your hands. If wax strip is too soft due to heat, place it in refrigerator for a few moments and then proceed with waxing. NOTE: Never allow the wax strip to remain on the skin; always pull it off immediately. 2. Separate wax strip by peeling apart the two sides. Note: Each strip becomes two strips that can both be used. 3. Apply strip (with wax facing down toward skin), firmly apply pressure and smooth in the direction of hair growth. With one hand, hold the skin taut. With the other hand, peel off the strip in one quick motion in opposite direction of hair growth. Keep the strip as close to the skin as possible. DO NOT PULL OFF UPWARDS. 4. Do not peel back cautiously. If you do, the strip will appear to be sticking to the skin. Always hold the skin taut and peel off quickly. Wax strip comes away clean and free, gripping only the hairs and causing minimum discomfort.